Wheels

Whisky Parts Co. Tubeless Rim Tape.

Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.

- Anodized aluminum - 50 nipples per bag - 12mm length

- Cold forged 304 stainless steel with rolled threads - Lightweight 2.0mm/1.7mm/2.0mm double-butted form - Nipples sold separately - 172g (32 spokes @ 262mm) - Bag of 50

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Joytech 9mm x 26, front hub - Compatible with 9mm x 26 axle - Cone Wrench Size: 13mm - Threads: 9mm x 26 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Joytech 9mm x 26, front hub - Taiwanese hubs with 9mm x 26 axle - 105 SC 1055 8-speed Rear - 105 SC 1056 7-speed Rear - XT-II M732 7-speed Rear

Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10

WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm

WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.

This lightweight, high-pressure rim tape offers great protection against spoke hole flats and is easy to install. This Italian-made tape is light and thin, so it will not inhibit tire fitting. Nylon elastic material is used to ensure a snug fit without movement.

- High performance adhesive tape, a great pairing with Velox Cement - Each roll is usually adequate for gluing two tubular tires - Protects tube from spoke/nipple/rim puncture

- For square taper and flanged. - Fits most cartridge BBs - Shell: 8mm Flanged axle bolt

- Shell: 8mm flanged axle nut - Flanged

Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.

Sta Tru Rear Wheels - Single Wall rim - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher

Sta Tru Rear Wheels - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 27.5" - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - ISO Diameter: 584 / 650b / 27.5" - Tire Type: Clincher - Rear Axle: QR x 135mm

Santa Cruz Reserve wheels are built on the highest quality carbon rims. Confidence in the design and strength of the Reserve wheels is backed up by a lifetime warranty. Everything from the thickness of the rim beads to the external spoke hole reinforcements comes purely from Santa Cruz's experience of knowing what riders need at every level—from international racing to your local trails. Built with standard high-quality components including j-bend spokes (28 count) and Sapim mechanically locking nipples Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels Backed by Santa Cruz lifetime warranty Hub/Brake Compatibility: 6-Bolt Disc Cassette Body Type: SRAM XD 11/12 Speed Wheel Size: 29" ISO Diameter: 622 / road / 29" Front Axle: 15mm Thru x 110mm Valve: Presta Rim Width (Internal): 30 Defined Color: Black Tire Type: Tubeless Ready Rear Axle: 12mm Thru x 148mm Lifetime Support From the composites engineers to our team of wheelwrights to our group of Rider Support reps, Reserve stands behind the wheels we make. Whether you’re flying down the legendary DH track at Ft. William, railing corners at the Mission Crit, or leaving it all out there on Queen Ka’ahumanu Highway, if you break a wheel, we’ll send you a new one within 24 hours. If you back over it with your car, we’ll get you a low-cost crash replacement ASAP. We know that missing a ride sucks, and missing a race can mean throwing away months of prep, and we’ll do everything we can to ensure that never happens because of one of our wheels.

Details Santa Cruz Reserve wheels are built on the highest quality carbon rims. Confidence in the design and strength of the Reserve wheels is backed up by a lifetime warranty. Everything from the thickness of the rim beads to the external spoke hole reinforcements comes purely from Santa Cruz's experience of knowing what riders need at every level—from international racing to your local trails. Built with standard high-quality components including j-bend spokes (28 count) and Sapim mechanically locking nipples Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels Backed by Santa Cruz lifetime warranty Hub/Brake Compatibility: 6-Bolt Disc Cassette Body Type: Shimano Micro Spline 12 Speed Wheel Size: 29" ISO Diameter: 622 / road / 29" Front Axle: 15mm Thru x 110mm Valve: Presta Rim Width (Internal): 37 Defined Color: Black Tire Type: Tubeless Ready Rear Axle: 12mm Thru x 148mm Lifetime Support From the composites engineers to our team of wheelwrights to our group of Rider Support reps, Reserve stands behind the wheels we make. Whether you’re flying down the legendary DH track at Ft. William, railing corners at the Mission Crit, or leaving it all out there on Queen Ka’ahumanu Highway, if you break a wheel, we’ll send you a new one within 24 hours. If you back over it with your car, we’ll get you a low-cost crash replacement ASAP. We know that missing a ride sucks, and missing a race can mean throwing away months of prep, and we’ll do everything we can to ensure that never happens because of one of our wheels.

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - This axle is compatible with bikes that use a NAILD thru-axle in the frame with 142 x 12mm spacing - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Converts CenterLock hubs to accept 6-bolt rotors - Available for standard Quick Release as well as Thru-Axle hubs - Extruded alloy collar with CNC shoulder pins and lock ring - Eliminates the need for rotor bolts

When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.

When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening