Filter By:
- Body Care (6)
- Children's-Bike Accessories (6)
- Electronics (26)
- Eyewear (21)
- Fenders (7)
- Hydration (23)
- Lighting (13)
- Locks/Security (7)
- Show More Categories
- Nutrition (7)
- Packs/Racks/Baskets (49)
- Pumps/Inflation (22)
- Safety (16)
- Storage (5)
- Tools/Maintenance (132)
- Trailers/Strollers (6)
- Other (14)
- Indoor Cycling (4)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Accessories
$99.99
Offering optimized back ventilation, the Hip Pack 3L is perfect for bike rides with little equipment. Thanks to the Venti Flap system you can individually adjust the distance of the fannypack to your back and the ventilation along the back panel. With the Bladder 1.5L, you also have the perfect, small hydration pack.
- Air Flow Contact System offers perfect back ventilation
- Separate and quick-access tool compartment
- 1.5L Hydration bladder included
$69.95
The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead.
- 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut
- Magnets keep all bits in place
- Ball detent swivel head helps access hard-to-reach places
- Handle doubles as breaker bar for extra torque when head is bent
- 8mm hex bit tested to over 40 Nm torque
- Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains)
- Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)
$17.95
$20.99
14% Off
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm
- Designed to maximize bottle capacity on small frame bikes and dual suspension frames
$22.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Three slots for additional adjustments over the B-RAD 2 base
- Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts
$24.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Long, four-slotted mount allows two, smaller bottles to be mounted in-line
- Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts
$29.95 - $34.95
$29.99 - $34.99
On Sale
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options.
- Mounts to bottle bosses, or to the B-Rad base for additional carrying options
- Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches)
- Cradle strap is 40mm wide and 350mm long for supporting loads
$9.99
Reusable zip ties
- 200mm long x 7.4mm wide
- 100 pieces
$24.99 - $26.99
$26.99 - $34.99
Up to 29% Off
We know you love the 133, 3133, and 157 baskets. But what happens when you want to haul something that isn't overly large, but can really weigh you down? We thought you'd probably bust out a welding torch and tack a couple of legs on the 133 basket. So that's exactly what we did. The 135 is the exact same size as our popular 133 and 3133 baskets with shorter handlebar mounts and legs bolted to the bottom of the basket. Perfect for a couple of two liters, or a six-pack with some chips and salsa to go.
- Basket dimensions: 14.5 X 9.5 X 9 inches
- Legs match the finish of the basket
- Same size as the popular 133 and 3133 baskets with shorter handlebar mounts
$34.99
This versatile basket is the most adaptable front basket Wald offers.
- Made in U.S.A. (Maysville, KY)
- Deep basket that is sized for a grocery sack
- Dimensions: 14.5 x 9.5 x 9 inches; basket tapers to 12.25 x 7 inches
- Extended handlebar clamps fit 7/8" and 1" diameter handlebars
- Two-piece adjustable legs extend from approx. 14 inches to 22 inches and mount to either the front axle or fork eyelets for bikes with quick release front hubs
- Available in gloss black (198GB) or white (198WH) Powder Coat Finish
- Complete basket weighs 3 lbs.
$12.99
- Versatile mini fenders work with almost any casual bike
- The #80 fits tire widths of 1.25-1.375"
- Single splash guard
$24.50
$39.99
39% Off
Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation.
The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.
$29.99
Wald's 1216 training wheels are designed to mount on most single speed bicycles with 12- to 16-inch wheels. This model is intended for use by riders weighing up to 75 pounds.
$6.99
- Pedal thread inserts are used to replace damaged threads in cranks
$27.99
Ursus KING EVO R78 Adjustable rear-mount integrated kickstand (18 mm PLATE) is an alloy kickstand and has the capacity to hold up to 75 lbs. URSUS KING EVO is ideal for bicycles that are compatible with an integrated mount at the rear dropout - 18mm center to center two-bolt mounting. The adjustable tool-free kickstand features a button that allows you to set the perfect length (263mm - 333mm) for your bike.
Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. Compatible with Trek and other bikes designed with direct mount 18mm mounting holes on the rear chainstays.
$7.99 - $147.15
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts.
- Ideal for all conditions - wet, dry, road and trail
- High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
$7.99
Tri-Flow Superior Dry Lubricant was specifically designed to lubricate like an oil and stay clean like a wax. Its exclusive formula includes paraffin wax and high grade petroleum oil which penetrates as it quickly sets up and dries, leaving a thin, visible, coating that repels water as it lubricates.
- Specifically designed for lubricating chains
- Applicator is not included or needed because of the product's consistency
$34.99
Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.
$32.95
$32.99
On Sale
Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.
$49.95 - $49.99
$49.99
On Sale
Topeak's Bike Cover makes it easy to keep your bike dust free. It stretches to fit your bike and closes at the bottom with an elastic strap. Plus, the Bike Cover easily folds to a compact size and features a built-in bag for carrying and storage.
- Dimensions (Road): 170 x 50 x 100cm
- Dimensions (Mountain): 178 x 63 x 100cm
$74.99
Dual-molded side panels combine with flexible 600 denier fabric to form a semi-rigid, weather-resistant trunk bag. It features a divided main compartment with mesh side compartments and rear water bottle holder. The MTS Trunkbag EX attaches with integrated straps.
- Capacity: 8L / 480 ci
- Weight: 530g/1.17 pounds
- Dimensions: 36 x 21 x 19 cm / 14.2" x 8.3" x 7.5"
- Compartments: 1 divided main pocket, 2 mesh side pockets
- Water bottle holder
- Shoulder strap
- Carrying handle
- Elastic top bungees
- 3M reflective strip
- Safety light clip
- Optional rain cover
- Insulation: Rigid EVA foam
- Bag attachment: Hook-and-loop fastener
$58.99
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags
- Integrated fender top
- 6061-T6 alloy construction
- 625g
- 55lb weight capacity
$64.95
$64.99
On Sale
- Specifically designed for 29" mountain bikes and larger volume 700C wheels
- Compatible with bike frames equipped with disc brakes
- Tubular aluminum rear rack for loaded touring
- MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets
- 6061 T-6 hollow aluminum
- 55lb weight capacity
- 680g
$59.99
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags
- Integrated fender top
- 6061 T6 alloy construction
- To be mounted on bikes with disc brakes
- 625g
- 55lb weight capacity
$54.95
$54.99
On Sale
Need more carrying capacity for running errands? Then check out Topeak's Rear Basket. It easily attaches to a Topeak QuickTrack rear rack (sold separately) and holds groceries, work clothes and anything else you need to transport. And, its handle makes it extremely portable.
$99.95
$99.99
On Sale
Topeak's MTX TrunkBag DX boasts an expandable main compartment to carry all the gear you need. It's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, taillight clip and top elastic straps. There are even reflective strips for safety. Plus, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately).
- Capacity 12.3 L / 750 ci
- Compartments 1 Divided main compartmetn, two side zippered pockets, Multi-expanding top compartment
- Added Features:
Water bottle holder Shoulder strap
Carrying handle
Elastic top bungees
3M reflective strip
Safety light clip
Optional rain cover
- Size (L x W x H): 36 x 25 x 21.5-29 cm / 14.2” x 9.8” x 8.5”~11.4”
- Weight: 985 g / 2.17 lb
$89.99
MTX QuickTrack compatible TrunkBag featuring a divided main compartment constructed with Topeak's unique process of combining rigid panels and flexible fabric for structure and water repellency. Features two mesh side compartments for extra capacity and rear water bottle holder lets you carry more water on extended trips.
- Attachments: 1 divided main compartment, two mesh side pockets
- Capacity: 8L / 480 ci
- Added Features:
Water bottle holder Shoulder strap
Carrying handle
Elastic top bungees
3M reflective strip
Safety light clip
Optional rain cover
- Size (L x W x H): 35 x 21 x 19 cm / 14.2” x 8.3” x 7.5”
- Weight: 870 g / 1.92 lb
$21.99
Never leave safety behind. Topeak's Mini 9 folding tool lets you take what you need and won't weigh you down. Its forged-aluminum body holds 9 tools including: 2, 2.5, 3, 4, 5, 6 and 8mm Allen wrenches, a T25 Torx wrench and a Phillips screwdriver. Plus this smart tool tucks neatly into its included neoprene case.
$20.99
Topeak's Modula Java Cage carries your 12 or 16 ounce coffee cup with ease, so you can bring your favorite hot beverage along for the ride. It grabs securely with a rubber strap and adjusts to fit most insulated mugs.
$12.99
For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames).
- If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.
Page 1 of 12
Next page