Tires/Tubes

The Maxxis Ardent is a light duty trail tire that rolls fast in dry conditions. For similar rolling speed with improved braking and cornering performance, check out the Rekon.

High-volume casing, low-profile tread - Aggressive side knobs - Dual Compound - Lightweight XC race tire - Race-inspired low profile design Maxxis has done it again with its latest XC race tire. The new Maxxis Aspen pushes the limits of a lightweight XC tire designed to have minimal rolling resistance. The Aspen is designed with a high-volume casing to smooth out the roughest roots and rocks, while the dual compounds give optimal traction in the corners. So, if crossing the finish line first is your top priority, then the Aspen was designed for you.

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

The Maxxis Ikon is a versatile XC tire designed to perform in a broad range of conditions. With its predictable handling, the Ikon is also a favorite among our slopestyle athletes.

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

Gravel and dirt road racing tire - Dual-Compound for longevity - Gravel-specific tread pattern - Tubeless Ready (TR) Maxxis' first gravel-specific tire, the Rambler, is designed with the volume you need for comfort and the tread you need for speed and control. Tightly packed center knobs are ramped for rolling efficiency on hardpack roads, and spaced-out side knobs provide predictable cornering in varied terrain.

The Rekon is an aggressive trail tire inspired by the Ikon - Designed for aggressive XC trails - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking, and L-shaped side knobs ensure support when carving loose turns. With confidence like this, you can race more and scout less with the Rekon.

The Rekon is a light duty trail tire designed to go fast in technical terrain.

The Rekon is an aggressive trail tire inspired by the Ikon - Designed for aggressive XC trails - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking, and L-shaped side knobs ensure support when carving loose turns. With confidence like this, you can race more and scout less with the Rekon.

The Maxxis Rekon Race is a semi-slick XC race tire that features the lowest profile tread in our XC line. It is a great choice for dry XC trails and short track racing.

Semi-slick CX racing tire with aggressive cornering knobs - Aggressive cornering knobs - EXO Protection - File tread design optimized for grass and hardpack - Tubeless Ready (TR) The Speed Terrane features a familiar file tread pattern optimized for early season cyclocross races. Micro-diamond knobs adorn the tread surface to offer blazing speed on hardpacked surfaces, while stacked paddle knobs down the middle offer unrivaled climbing and braking traction so you can attack whenever you like. When the course gets twisty, the siped and offset cornering knobs will dig in to give you the support to brake later and push your tires as hard as your legs. Worry less about your tires and more about the holeshot!

If you load your bike with heavy cargo or need an extra bit of traction for an extended haul, the Tour Guide Tire is your beast of burden! Its shoulder-to-shoulder sipes, combined with a thick tread cap, and puncture protection equip this tire with reliability for conditions most cyclists would not attempt to conquer. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

Keep wind in your sails and air in your tires with one of MICHELIN's Airstop butyl inner tubes. These hold air pressure thanks to butyl construction, and are puncture-resistant to ensure you ride without fear of glass, wicked goat heads, or other road debris. Stick one in your jersey pocket and get out there!

Made from top quality butyl, more airtight and sturdy.

The Comp III in K50 Tread is a great tire for any BMX or kid's bike. - K50 tread pattern - Made from quality Kenda rubber

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair - Wire bead - 22tpi

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

- Directional tread gives a smooth ride - Good traction for country roads with light gravel and dirt

Kenda Kontact K841 BMX tire features a wrap around tread design with a knurled surface for better traction and control.

The Kenda Kwest Hybrid Tire is a road tire designed with a smooth rounded tread with large water dispersion grooves. - Kenda endorses the use of fluid based sealants only in specifically designated Kenda sealant compatible tire

Kenda Kwest High Pressure Road tire is designed with a smooth rounded tread with large water dispersion grooves. - The Kwest High Pressure Road Recumbent tire is constructed of a steel bead and rates at a max of 100 PSI

- Smooth-rolling tread pattern for street use - Deep grooves help sipe water away in wet weather

The Kwick Journey was designed for all the roads your journey will take you on. Built to last with a reinforced sidewall and K-Shield (KS) protection, approved for use up to 30mph. - Deep sipes for water channeling in wet conditions - Knurled shoulder knobs for corning confidence - Front and Rear application - K-Shield (KS) is a layer of light, flexible rubber containing aramid and ceramic particles inside the tire under the tread area only. Designed to prevent punctures and increase tire life - Reflective stripe on sidewalls for added safety

Kwick Journey commuter/trekking tires feature a reinforced sidewall with K-Shield tread protection under Kenda's long lasting Standard Rubber Compound. - Deep sipes for water channeling in wet conditions - Knurled shoulder knobs for corning confidence - Reflective tape across sidewalls for better urban nighttime visibility - Certified ECE-R75 for E-Bikes up to 50 km/h

- Standard 1mm tube thickness - Presta valve

Kenda Presta valve tubes are dependable replacements. Use them to build up your bike, and throw a spare in your bag so you can keep on riding.

- Standard 1mm tube thickness - Schrader valve

The Kenda Street BMX Series Tires are constructed of a steel bead and are available in a variety of sizes.

The InteZZo commuter tire has an anti-flat belt. The tread pattern is specially engineered to provide a smooth ride on unpaved roads and control on wet surfaces.

- BlackBelt aramid fiber belt between the casing and tread increases puncture resistance - Pavement, Path, & Trail (PPT) center-ridge tread for easy pedaling

- Multi-use tread for city, comfort, commuting, and trekking bikes - BlackBelt aramid fiber belt between the casing and tread increases puncture resistance

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's thorn tubes use thicker rubber to prevent some flats and punctures.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. - Valve length: 35mm

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. These tubes fit older Schwinn bicycles with 26 x 1-3/8-inch wheels. - For use on rims with ISO diameter: 597mm

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. - Valve length: 35mm

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. This tube features a 48mm-long valve stem ideal for deep-section rims.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. - Valve length: 32mm

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. This tube features a 48mm-long valve stem ideal for deep-section rims.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

- Long-lasting, high-quality rubber compound - Center tread siping for enhanced wet road traction - Continuous center tread for a smooth ride

- Micro knurled surface for maximum grip - Fast rolling shallow groove tread pattern - Roll over tread surface for confident cornering

- Fast rolling with consistent, predictible traction - Directional tread pattern ideal for dry to tacky trail conditions - Angled, siped knobs spaced for enhanced cornering bite

- Fast rolling, durable compound - Continuous center tread for a smooth ride - Directional siping for enhanced traction on wet pavement

- 0.9mm wall thickness - 700c x 18 – 25 = 27 x 1 - 700c x 28 – 35 = 27 x 1-1/8, 1-1/4

- Easy-rolling on/off-road compound - Knobs spaced for grip in the dirt and grass - Continuous center tread for a smooth ride

Continental's ultra-tough Gator Hardshell combines 3 flat-protection technologies into the ultimate distance and training tire. It features a flat-busting, bead-to-bead layer of DuraSkin and an extra-wide Poly-X Breaker anti-puncture strip. But Conti wasn't done yet. They added material in the tread to improve mileage and lend another level of puncture resistance.

Continental's ultra-tough Gator Hardshell combines 3 flat-protection technologies into the ultimate distance and training tire. It features a flat-busting, bead-to-bead layer of DuraSkin and an extra-wide Poly-X Breaker anti-puncture strip. But Conti wasn't done yet. They added material in the tread to improve mileage and lend another level of puncture resistance. Plus, the folding bead keeps the weight low. Weight: 23c: 250 grams 25c: 270 grams 28c: 350 grams 32c: 385 grams